Silicone lubricants offer the following advantages: high power sliding, heat resistance, high thermal conductivity, low sensitivity to temperature variations, wide temperature range of use, long life and excellent compatibility with plastics and elastomers. Fluid silicones are available from a viscosity of 50 cSt. up to 1 million cSt. The greases with various viscosity in the base fluid can be thickened with silicate, lithium or PTFE in such a way as to vary resistance to loads, lubricants and gliding properties in a temperature range from -70°C to + 200°C. A complete range of products able to meet the various application requirements is readily available.
Tis is a partial selection, for complete range or technical data sheet please contact: tecnico@tecnolubeseal.it
Product |
Description-Application |
Temp.
|
Base Oil |
Soap |
Additives |
| Spray Silicone 300 | silicone spray with a great power sliding and releasing. Excellent compatibility with plastics and elastomers. |
-40 +200* |
SIL |
||
| Liquid Mold Release FG | aqueous emulsion to facilitate the mounting of gaskets or plastic components. |
-40 +200 |
SIL |
||
| Siliconi HT-HD-EHD Fluid | dimethylsilicone oils with wide potential applications, available in various viscosity 50 cSt. to 1 million Cst. |
-40 +200 |
SIL |
||
| Silon Comp 101S/0 | silicone grease and silica-thickened with PTFE, cohesive and adhesive, compatible with plastics and elastomers. |
-40 +180 |
SIL |
Silicate |
PTFE |
| Rheosil 500F | silicone grease thickened with lithium; with PTFE to improve lubrication properties, particularly suitable for dynamic applications even under stress. |
-40 +200 |
SIL |
Lithium |
PTFE |
| Fluorocarbon Gel 880 | silicone grease of high viscosity thickened with PTFE (approx. 40%), also indicated for EPDM; for low/high temperatures and harsh environmental conditions. |
-40 +200 |
SIL |
PTFE |
|
| Fluorocarbon Gel 880MS | silicone grease of high viscosity thickened with PTFE (about 40%) also indicated for EPDM; fortified with MoS2, to improve the load capacity. |
-40 +200 |
SIL |
PTFE |
*valid for the product without solvent