Seals are highly sensitive components that are extremely important for the performance, durability and proper working order of any pneumatic actuator. Gasket greases and oils protect the elastomer during assembly, ensuring greater lubrication and a low friction coefficient throughout the component’s lifecycle. Small amounts of special greases ensure good sealing action, improve sensitivity and reduce stick-slip. They are available in a wide range of products in order to ensure complete compatibility with any type of elastomer.
This is a partial selection, for the complete range or technical data sheet please contact: tecnico@tecnolubeseal.it
Product |
Description-Application |
Temp.
|
Base Oil |
Soap |
Additives |
| Nyoil |
super-refined oil, odroless, colorless, NSF-H1 certified ideal for the lubrication of components or seals. |
-20+100 |
MIN |
||
| FG Oil 1001 | Multipurpose low viscosity synthetic oil. Extremely penetrating ideal for lubrication in dusty environments. Also available in spray. |
-40+140 |
PAO |
|
PTFE |
| Spray Dry PTFE | dispersion of PTFE-based lubricant powders diluted in solvents and organic binders. Air dries to a dry film, with excellent skills and strong friction. |
-180+300* |
Binder |
|
PTFE |
| Spray MP 3000 | synthetic oil also compatible with EPDM for the lubrication of the seals during assembly. |
PAG |
|
||
| Polymer 400/1 | The pioneer of pneumatics: adhesive grease with PTFE, resistant to stress, improves and maintains the sliding surfaces. For averages operating temperatures. |
-20+125 |
MIN |
Lithium Complex |
PTFE |
| Synthy Poymer 402 | synthetic grease with PTFE with a wide range of operating temperatures. |
-29+135 |
PAO |
Clay |
PTFE |
| FG Synthy Grease 402 | synthetic grease with low initial starting point and excellent stability. |
-40+120 |
PAO |
Clay |
FM |
| Synthy Pneugrease 420 | synthetic grease with PTFE/boron to improve the sliding at low and high temperature. Reduces stick-slip. |
-29+135 |
PAO |
Clay |
PTFE/Boron |
| Rheolube 362HB | synthetic grease with PTFE and specific friction modifiers to improve the adhesion on the moving parts. Excellent sensitivity to low and medium/high temperatures. |
-40+125 |
PAO |
Lithium |
PTFE/FM/UV |
| Rheolube 362F-368F | synthetic greases with PTFE with low and medium viscosity base oil, according to the application requirements and environmental temperatures or exercise. |
-54+125 |
PAO |
Lithium |
PTFE |
| Rheolube 374 A | synthetic grease with excellent lubricity and EP, for extreme temperatures and low torque. |
-54+175 |
PAO/AN |
Lithium |
EP |
| Fluorocarbon Gel 885 | silicon grease thickened with PTFE 8approx. 40%) with excellent lubricating capacity. Low sensitivity to temperature variation. |
-40+200 |
SIL |
PTFE |
|
| Uniflor 8512S | PFPE thickened with PTFE compatible with plastics and elastomers indicated for extreme temperatures and/or aggressive chemical agent. Non-flammable, low evaporation, long life. |
-50+225 |
PFPE |
PTFE |
*valid for the product without solvent