TecnolubeSeal | Greases for Industrial and Petroleum Valves
1914
page,page-id-1914,page-child,parent-pageid-1864,page-template-default,ajax_updown_fade,page_not_loaded,,large,shadow3,wpb-js-composer js-comp-ver-3.5.5,vc_responsive

GREASES FOR INDUSTRIAL AND PETROLEUM VALVES

Industrial and petroleum valves are similar in character but can also be very different due to environmental conditions, chemicals and type of valve. Almost all the valves have an occasional or intermittent function which must always respond to maximum efficiency at any time and under any environmental condition. Lubricants for industrial valves must ensure low friction, resistance to chemicals and, in many cases, even improve the sealing action of the valves. Identifying the features of the application is extremely important when deciding on the right lubricant to use.


This is a partial selection, for the complete range or technical data sheet please contact: tecnico@tecnolubeseal.it

 

 

Product
Description-Application
Temp.
Range(°C)
Base Oil
Soap
Additives
Spray Dry Series dispersions of various lubricant powders diluted in solvents and organic binders. Air dry to form a dry film, tough and with good anti-friction capacity (please see Dry Antifriction Coating)  -180+1200*

Binder

 

PTFE/MoS2/Graphite/NB
Rust Plus NB Corrosion inhibitors, water soluble, transparent to test the valves in the tank or pressure.

 

 

BC 101 anti-seize compound with PTFE mounting, for assembly and threads.

-15+120

MIN

Clay

 PTFE
Semi Liquid 505-506 semi liquid grease for petroleum valves, with PTFE excellent lubricating ability and sealing even with tight tolerances and/or seals of trees.

MIN

Inorganic

PTFE

Valve Synthetic 622 Artic Grade synthetic grease with a higher lubricating capacity and sealing, specifically formulated for artic environmental conditions.

-59+160

EST

Silicate

PTFE

Valve Seal synthetic grease with PTFE with excellent lubricating capacity and high durability. For valves and valve stem to acid, oil and/or fuel.

-20+204

SYNT

Silicate

PTFE

Valve Synthetic Peanut synthetic grease, particularly soft and adhesive for the lubrication of petroleum valves in contact with water, gas condensates.

-18+140

SYNT

Inorganic

Veget.

607L Valve Plus silicon grease with PTFE, resistant to CO2 with excellent holding power. Shown in wide temperature range.

-45+200

SIL

Inorganic

PTFE

Valve 643HV synthetic grease high density, with excellent lubricating capacity and seal for plug valves in contact with acids, caustic and harsh chemicals.

-6+204

SYNT

Inorganic

PTFE

 

Master Compound HP lubricating paste adhesive, spreadable, with a high viscosity. It offers high resistance to water washout, excellent corrosion protection and high load resistance.

-20+140

MIN/PIB

Calcium Sulfonate

PTFE

 

*valid for the product without solvent